Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever the following DTCs are not present | P0128 (Thermostat) P0136, P0137, P0138, P0139 (HO2 sensor) P0420 (Catalyst) P0505 (Idle speed control) P050A (Cold start strategy) P2195, P2196 (A/F sensor) P2237, P2238 (A/F sensor) P2A00 (A/F sensor) |
| Fuel system status | Closed-loop |
| Battery voltage | 11 V or more |
| Either of the following conditions A or B is met. | - |
| A. Engine RPM | Below 1, 100 rpm |
| B. Intake air amount per revolution | 0.22 g/rev or more |
| Catalyst monitor | Not executed |