Typical Enabling Conditions
| Monitor runs whenever following DTCs not stored | P0112, P0113 (Intake air temperature (IAT) sensor) P0117, P0118 (Engine coolant temperature (ECT) sensor) P0462, P0463 (Fuel level sensor (FL)) |
| Battery voltage | 10.9 V or more |
| Soak time | 6 hours or more |
| Elapsed time after electric circuit turned on (ignition switch ON) | 60 seconds or less |
| Engine coolant temperature at the end of the previous driving cycle | 70.2°C (158.2°F) or higher (varies with estimated ambient temperature at previous ignition switch off) |