Typical Enabling Conditions
ALL
| Monitor runs whenever following DTCs are not present | None |
TIMER DIAGNOSIS
| Ignition switch | Off |
| Battery voltage | 10.9 V or more |
| Elapsed time after engine start | 10 minutes to 17.05 hours |
FULL COUNT DIAGNOSIS
| Ignition switch | Off |
| Battery voltage | 10.9 V or more |
| ECM timer | 4 seconds or more |
TIMER DIAGNOSIS (CASE 1)
| Ignition switch | Off |
| Battery voltage | 10.9 V or more |
TIMER DIAGNOSIS (CASE 2)
| Ignition switch | Off |
| Battery voltage | 10.9 V or more |
WAKE-UP DIAGNOSIS
| Ignition switch | On |
| Soak time | 1 hour or more |