LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2013 >> tC Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System (W/ Smart Key System) (Diagnostics - Introduction) >> WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) >> Data List / Active Test >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. DATA LIST 

    HINT: 

    Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. According to the display on the Techstream, read the Data List.
      MAIN BODY

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Engine switch on (ACC) signal / ON or OFF ON: Engine switch on (ACC)
      OFF: Engine switch off      		 "ON" is also displayed for this item when the engine switch is on (IG).
      IG SW Engine switch on (IG) signal / ON or OFF ON: Engine switch on (IG)
      OFF: Engine switch off or on (ACC)      		 "OFF" is also displayed for this item when the engine switch is on (ACC).
      Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF ON: Back door open
      OFF: Back door closed      		 -
      Back Door Lock Pos SW Back door lock position switch status / ON or OFF ON: Back door unlocked
      OFF: Back door locked      		 -
      FR Door Lock Pos Front passenger side door lock position switch signal / UNLOCK or LOCK UNLOCK: Front passenger side door unlocked
      LOCK: Front passenger side door locked      		 -
      FR Door Courtesy Front door courtesy light switch RH signal / ON or OFF ON: Front passenger side door closed
      OFF: Front passenger side door open      		 -
      FL Door Lock Pos Driver side door lock position switch signal / UNLOCK or LOCK UNLOCK: Driver side door unlocked
      LOCK: Driver side door locked      		 -
      FL Door Courtesy Front courtesy light switch LH signal / ON or OFF ON: Driver side door closed
      OFF: Driver side door open      		 -
      Wireless Control Wireless door lock control function / ON or OFF Customized value displayed -
      Hazard Answer Back Wireless hazard answer-back / ON or OFF Customized value displayed -
      Open Door Warning Open door warning / ON or OFF Customized value displayed -
      Unlock 2 Operation Unlock 2 operation of wireless unlock / ON or OFF Customized value displayed -
      Panic Function Panic function / ON or OFF Customized value displayed -
      Auto Lock Time Automatic lock time / 120 s, 60 s or 30 s Customized value displayed -
      Wireless Auto Lock Automatic lock function / ON or OFF Customized value displayed -
      Wireless Buzzer Resp Wireless buzzer answer-back / ON or OFF Customized value displayed -
      Wireless Buzzer Vol Wireless door lock buzzer volume / Level 7, level 6, level 5, level 4, level 3, level 2, level 1 or level 0 Customized value displayed -
      The Number of DTC Number of trouble codes / Min.: 0, Max.: 255 Number of DTCs stored -
  2. ACTIVE TEST 

    HINT: 

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Active Test.
    5. According to the display on the Techstream, perform the Active Test.
      MAIN BODY

      Tester Display Test Part Control Range Diagnostic Note
      Hazard Turn signal flasher relay ON/OFF -
      Illuminated Entry System Map light assembly, No. 1 room light assembly ON/OFF Perform troubleshooting with the map light assembly switch set to the door position and do not press the map light switch.
      Wireless Buzzer Wireless door lock buzzer ON/OFF -
      Door Lock All door lock motors Lock/Unlock/OFF -
scientia non olet · About LEMON Manuals