DTC P2014: Intake Manifold Runner Position Sensor / Switch Circuit (Bank 1); DTC P2016: Intake Manifold Runner Position Sensor / Switch Circuit Low (Bank 1); DTC P2017: Intake Manifold Runner Position Sensor / Switch Circuit High (Bank 1): Description

The Tumble Control Valve (TCV) position sensor is a non-contact type sensor.

The position sensor measures the opening angle of the TCV. The sensor is reliable and accurate, as it is electrically controlled by Hall-effect elements.

Fig 1: TVC Position Sensor Circuit & Graph

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

DTC No.	DTC Detection Condition	Trouble Area
P2014	The TCV position sensor output voltage flutters up and down beyond the normal operating range (below 0.2 V or higher than 4.8 V) for more than 0.5 seconds (open or short) (1 trip detection logic).	Open or short in TCV position sensor circuit Intake air control valve actuator (for TCV) ECM
P2016	The TCV position sensor output voltage is below 0.2 V for more than 0.5 seconds (short) (1 trip detection logic).	Open or short in TCV position sensor circuit Intake air control valve actuator (for TCV) ECM
P2017	The TCV position sensor output voltage is higher than 4.8 V for more than 0.5 seconds (open) (1 trip detection logic).	Open or short in TCV position sensor circuit Intake air control valve actuator (for TCV) ECM

HINT:

When DTC P2014, P2016 or P2017 is output, use the Techstream to confirm the IAC Sensor Voltage (TCV position sensor output voltage). Enter the following menus: Powertrain / Engine / Data List / All Data.

IAC Sensor Voltage	Malfunction
0.2 V or less	IAC1 circuit shorted VCIA circuit open
4.8 V or higher	VCIA and IAC1 circuit short-circuited IAC1 circuit open EIA1 circuit open