DTC B1787: Rear Occupant Classification Sensor LH Collision Detection: Description

DTC B1787 is set when the occupant classification ECU receives a collision detection signal, which is sent by the rear occupant classification sensor LH when an accident occurs.

DTC B1787 is also set when the front seat frame with adjuster RH is subjected to a strong impact, even if an actual accident has not occurred.

However, when the occupant classification ECU outputs a collision detection signal, even if the vehicle is not in a collision, DTC B1787 can be cleared by conducting the zero point calibration and sensitivity check.

Therefore, if DTC B1787 is output, first perform the zero point calibration and sensitivity check.

HINT: 

• When DTC B1650/32 is set as a result of troubleshooting the airbag system, perform troubleshooting for DTC B1787 of the occupant classification system.
• Use a Techstream to check for DTCs of the occupant classification ECU, otherwise the DTCs cannot be read.