Typical Enabling Conditions
| Monitor runs whenever following DTCs not stored | P0112, P0113 (Intake air temperature (IAT) sensor) P0117, P0118, P0125 (Engine coolant temperature (ECT) sensor) P0122, P0123, P0222, P0223 (Throttle position sensor) P0500 (Vehicle speed sensor (VSS)) P0604 (RAM in ECM) P0605 (ROM in ECM) P1160 (Throttle return spring) P2101, P2102 (Throttle actuator control motor) P2109 (Throttle position sensor minimum stop) P2119 (Throttle actuator control) P2122, P2123, P2127, P2128 (Accelerator pedal position sensor (APPS) circuit) P2135 (Throttle position sensor (TPS) correlation) P2138 (Accelerator pedal position sensor (APPS) correlation) |
| Battery voltage | 10.9 V or more |
| Engine coolant temperature | 60°C (140°F) or higher |
| Integrated amount of intake air | 6500 g or more |
| Either of the following condition is met: | 3 times or more |
| A. All of the following conditions are met: | (a), (b) and (c) |
| (a) Time period | 10 seconds or more |
| (b) Vehicle speed | 40 km/h (24.9 mph) or more |
| (c) Intake air mass per second | 10 g/sec or more |
| B. All of the following conditions are met: | (a) and (b) |
| (a) Time period | 10 seconds or more |
| (b) Vehicle speed | Less than 4 km/h (2.5 mph) |