Typical Enabling Conditions
FOR MANUAL TRANSMISSION
| Monitor runs whenever following DTCs not present | P0500 (Vehicle speed sensor (VSS)) |
| ST relay | Off |
| Starter | Off |
| Battery voltage | 10.9 V or more |
| Driving condition change from the following condition A to B: | 3 count |
| A. All of the following conditions are met: | (a) and (b) |
| (a) Vehicle speed | Less than 0 km/h (0 mph) |
| (b) Engine speed | 550 to 880 rpm |
| B. All of the following conditions are met: | (a) and (b) |
| (a) Vehicle speed | 64 km/h (39.8 mph) or more |
| (b) Engine speed | 1600 to 2600 rpm |
FOR AUTOMATIC TRANSMISSION
| Monitor runs whenever following DTCs not present | P0512 (Starter Switch Circuit with Push Start System) U0073, U0101, U0402 (CAN system) |
| ST relay | Off |
| Starter | Off |
| Battery voltage | 10.9 V or more |
| MIL not illuminated for DTC | U0101 |
| Engine speed | 500 rpm or more |