Component Operating Range
Both the following conditions (A) and (B) are met:
P0841:
| Condition (A): | |
| Following conditions are met | |
| Target clamping pressure | Less than 1 MPa (10.2 kgf/cm2 , 145 psi) |
| |Actual clamping pressure - Target clamping pressure| | 0.5 MPa (5.1 kgf/cm2 , 72.5 psi) or less |
| Condition (B): | |
| Following conditions are met | |
| Target clamping pressure | More than 1.2 MPa (12.24 kgf/cm2 , 174 psi) |
| |Actual clamping pressure - Target clamping pressure| | 0.5 MPa (5.1 kgf/cm2 , 72.5 psi) or less |
Both the following conditions (A) and (B) are met:
P2829:
| Condition (A): | |
| Following conditions are met | |
| Target clamping pressure | Less than 0.7 MPa (7.14 kgf/cm2 , 101 psi) |
| Actual clamping pressure | Less than 1 MPa (10.2 kgf/cm2 , 145 psi) |
| Condition (B) | |
| Following conditions are met | |
| Calculated input torque | 12 N*m (122 kgf*cm, 8.85 ft.*lbf) or more (At actual gear ratio 2.386 (Conditions vary with actual gear ratio)) |
| Actual gear ratio | 2.6 or less |