DTC B1761: Occupant Classification Sensor Soaked [05/2014 - ]: Procedure

1. Open the car windows inside a well-ventilated room and let the sheet dry for 24 hours.

NEXT: Go to next step 

1. Clear the DTCs stored in the occupant detection ECU. Refer to DTC CHECK / CLEAR [05/2014 - ] .
2. Clear the DTCs stored in the airbag ECU assembly. Refer to DTC CHECK / CLEAR [05/2014 - ] .
3. Turn the ignition switch off.
4. Turn the ignition switch to ON.
5. Check for DTCs. Refer to DTC CHECK / CLEAR [05/2014 - ] .

   OK

   DTC B1761 is not output.

   HINT: 

   Codes other than DTC B1761 may be output at this time, but they are not related to this check.

NG → REPLACE FRONT SEAT ASSEMBLY RH 

OK → END