DTC U0073: Control Module Communication Bus "A" Off; DTC U0401: Invalid Data Received From ECM/Pcm "A"; DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module; DTC U0422: Invalid Data Received From Body Control Module; DTC U0423: Invalid Data Received From Instrument Panel Cluster Control Module [05/2014 - ]: Description

HINT:

Problems on the CAN Bus (communication line) can be detected from the DLC3 connector (Except when the DLC3 branch line is open).
By using the Techstream, it is possible to check CAN communication DTC.
The DLC3 is connected to the CAN communication line, but the CAN communication is unable to detect problems on the DLC3 branch line.

DTC No.	DTC Detection Condition Diagnosis Condition Malfunction Status Malfunction Time Other	Trouble Area
U0073	Ignition voltage is 9 V or more, and this condition continues for 1 second or more. Data reception and transmission are not possible 500 ms 1-trip detection logic	CAN communication system
U0401	CAN Bus is normal. Reception of malfunction signal from the ECM. 50 times 1-trip detection logic	CAN communication system
U0416	CAN Bus is normal. Reception of malfunction signal from the skid control ECU (brake actuator assembly). 40 times 1-trip detection logic	CAN communication system
U0422	CAN Bus is normal. Reception of malfunction signal from the main body ECU (network gateway ECU). 40 times 1-trip detection logic	CAN communication system
U0423	CAN Bus is normal. Reception of malfunction signal from the combination meter assembly. 40 times 1-trip detection logic	CAN communication system