Typical Enabling Conditions
FOR MANUAL TRANSMISSION
| Monitor runs whenever following DTCs not stored | P2158 (Vehicle Speed Sensor "B") U0416 (Invalid Data received from Vehicle Dynamics Control Module) U0122 (Lost Communication with Vehicle Dynamics Control Module) U0073 (Control Module Communication Bus "A" Off) P0616 (Starter Relay Circuit Low) P0617 (Starter Relay Circuit High) |
| Battery voltage | 10.9 V or more |
| Driving condition change from the following condition A to B: | 3 count |
| A. All of the following conditions are met: | (a) and (b) |
| (a) Vehicle speed | 0 km/h (0 mph) or less |
| (b) Engine speed | 550 to 880 RPM |
| B. All of the following conditions are met: | (a) and (b) |
| (a) Vehicle speed | 64 km/h (39.8 mph) or more |
| (b) Engine speed | 1600 to 2600 RPM |
ALL (FOR AUTOMATIC TRANSMISSION)
| Monitor runs whenever following DTCs not stored | U0402 (Invalid Data received from TCM) U0101 (Lost Communication with TCM) U0073 (Control Module Communication Bus "A" Off) P0616 (Starter Relay Circuit Low) P0617 (Starter Relay Circuit High) |
| Battery voltage | 10.9 V or more |
| Starter relay feedback voltage | Less than (battery voltage X 0.35) |
| Engine speed | 500 RPM or more |
P0851 (FOR AUTOMATIC TRANSMISSION)
| Transmission range from TCM | Not Park/Neutral |
P0852 (FOR AUTOMATIC TRANSMISSION)
| Transmission range from TCM | Park/Neutral |