DTC P0711: Transmission Fluid Temperature Sensor "A" Circuit Range / Performance [06/2015 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

   Powertrain > Engine and ECT > Trouble Codes 

5. Read the DTCs using the Techstream.

   HINT: 

   If any DTCs other than P0711 are output, perform troubleshooting for those DTCs first.

   Result

   Result	Proceed to
   Only DTC P0711 is output	A
   DTC P0711 and other DTCs are output	B

Result:  2

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2015 - ] 

Result:  1

A 

See step  2

1. Check the CVT fluid level.

   Refer to ADJUSTMENT [06/2015 - ]

   OK

   CVT fluid level is correct.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

ADD FLUID. Refer to  ADJUSTMENT [06/2015 - ] 

Result:  1

OK 

See step  3

1. Replace the continuously variable transaxle assembly.

   Refer to COMPONENTS [06/2015 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

PERFORM INITIALIZATION. Refer to  INITIALIZATION [06/2015 - ]