Typical Enabling Conditions
ALL
| Battery voltage | 8 V or more |
| Time after Battery voltage >= 8V | 0.5 seconds or more |
| Write Inhibit | permit |
| Time after Write status forbiddance to permit | 0.5 seconds or more |
| Ignition switch | ON |
| Time after Ignition switch OFF to ON | 0.5 seconds or more |
| Starter | OFF |
| Time after Starter ON to OFF | 0.5 seconds or more |
P0712:
| The monitor will run whenever the following DTCs are not present. | None |
P0713 CONDITION (A):
| Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start. | -29.375°C (-20.875°F) or less |
| Time after engine start | 10 minutes |
| ECT (Engine coolant temperature) Sensor circuit fail (P0115, P0117, P0118) | Not detected |
| IAT (Intake air temperature) Sensor circuit fail (P00AC, P00AD, P0110, P0112, P0113) | Not detected |
P0713 CONDITION (B):
| Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start. | More than -29.375°C (-20.875°F) |
| Time after engine start | 10 seconds |
| ECT (Engine coolant temperature) Sensor circuit fail (P0115, P0117, P0118) | Not detected |
| IAT (Intake air temperature) Sensor circuit fail (P00AC, P00AD, P0110, P0112, P0113) | Not detected |