LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1974 >> GL Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starter Controls - NIPPONDENSO >> Testing >> Pull-In Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pull-In Test

Apply 8 volts momentarily between the "50" terminal and the "F" terminal of the solenoid. If the plunger is pulled in strongly the pull-in coil is satisfactory.

Fig 1: Pull-In Coil Test Connections
G09349654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals