Hard Failures

When system failures occur, "CHECK ENGINE" light illuminates. This function, termed the "U-CHECK" mode, monitors only the EFC components necessary for start-up and drive. This is a continuous system function for the purpose of alerting the vehicle TABLE operator to a needed repair.

"D-CHECK" mode diagnosis entire EFC system. In "D-CHECK" mode, problem related trouble code(s) are displayed on O2 monitor. See Fig. 1. The code(s) remain accessible until malfunction is repaired. Malfunction is determined using diagnostic (code) charts. If more than one code is present, the lowest number trouble code is to be diagnosed first.