LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1991 >> XT Standard >> Repair and Diagnosis >> Electrical >> Starter - Reduction Gear >> Bench Testing >> Load Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Load Test

  1. Using proper starter bench tester, connect test equipment and apply specified load to starter. See STARTER SPECIFICATIONS  table at end of article. Engage tester switch for less than 30 seconds. Note and record voltage drop and current draw.
  2. Voltage should not drop to less than 8 volts. On A/T models, current draw should be less than 370 amps and rotating speed should be greater than 880 RPM. On M/T models, see STARTER SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals