Circuit Test
- Ensure gear select lever is in Park or Neutral position. Turn ignition switch to START position and check for near battery voltage at starter solenoid terminal "S" (Black/Yellow wire). If near battery voltage exists and starter does not crank, repair or replace starter. If voltage does not exist, check for voltage at inhibitor switch Black/Yellow wire terminal.
- Inhibitor switch is located on transmission lever. If voltage exists at inhibitor switch Black/Yellow wire terminal, repair wiring to starter. If voltage does not exist, check for voltage from ignition switch to inhibitor switch Black/White wire terminal.
- If voltage exists at inhibitor switch Black/White wire terminal, replace inhibitor switch. If voltage does not exist, check for voltage at ignition switch terminal "S" (Black/White wire). If voltage exists, repair Black/White wire between ignition switch and inhibitor switch. If voltage does not exist at ignition switch terminal "S", replace ignition switch.