LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1999 >> Legacy SUS, 2.5, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel System >> Oxygen Sensor (O2S) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oxygen Sensor (O2S): Installation

If old sensor is reused, apply anti-seize compound to sensor threads. Keep anti-seize compound away from sensor body. New sensors are coated with anti-seize compound. DO NOT remove anti-seize compound from sensor. Tighten to 13-18 ft. lbs. (18-24 N.m).

scientia non olet · About LEMON Manuals