Removal And Installation
WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect battery ground cable.
- Remove side sill front cover.
- Detach floor mat of front passenger seat.
- Remove protect cover.
- Remove nuts which hold ECM to bracket.
- Remove clip from bracket.
- Disconnect ECM connectors.
- Take out ECM.
- Install in the reverse order of removal.CAUTION: When replacing ECM, be careful not to use the wrong specification. ECM to avoid any damage to the fuel injection system.