LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> On-Vehicle Service & Testing >> Inhibitor Switch >> Adjustment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inhibitor Switch: Adjustment

  1. Loosen the three inhibitor switch securing bolts.
  2. Shift the select lever to the N range.
  3. Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body. ST 499267300 STOPPER PIN
    Fig 1: Adjusting Inhibitor Switch
    G02037021
  4. Tighten the three inhibitor switch bolts.

    Tightening torque: 

    1. 3.4 N-m (0.35 kgf-m, 2.5 ft-Ib) 
  5. Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.
scientia non olet · About LEMON Manuals