LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (A/T & M/T Control Systems) >> Select Lever >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Assembly

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts before assembly.
  2. Apply grease [MULTEMP AC-D or equivalent] to each parts. Refer to AT SELECT LEVER  , COMPONENT, General Descriptions.
  3. Assembly is in the reverse order of disassembly.
  4. After completion of fitting, transfer select lever to position " P" - "1", then check whether the indicator and select lever agree, whether operating force is.
scientia non olet · About LEMON Manuals