Manual System Torque Specifications
WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Compressor Bracket Bolts | ||
| Main Bracket | 26 (35) | |
| Sub Bracket | 26 (35) | |
| Compressor Bracket-To-Compressor Bolt | ||
| Main Bracket | 21 (29) | |
| Sub Bracket | 21 (29) | |
| Condenser/Receiver Drier Pipe-To-Condenser Bolt | 11 (15) | |
| High-Pressure Hose-To-Condenser Bolt | 11 (15) | |
| Hose-To-Compressor Bolts | ||
| High-Pressure | 11 (15) | |
| Low-Pressure | 11 (15) | |
| Idler Pulley Bracket | ||
| Bolt | 17 (23) | |
| Nut | 17 (23) | |
| INCH Lbs. (N.m) | ||
| Compressor Belt Cover Bolts | 66 (7.4) | |
| Condenser Bolt | 66 (7.4) | |
| Condenser/Receiver Drier Pipe-To-Receiver Drier Bolt | 66 (7.4) | |
| Heater Case | ||
| Bolt | 66 (7.4) | |
| Nut | 66 (7.4) | |
| Intake Unit Case | ||
| Lower Bolt | 66 (7.4) | |
| Upper Nut | 66 (7.4) | |
| Receiver Drier Bolt | 66 (7.4) | |