Drive Cycles: Notes
WARNING: This page is about a different car, the 2002 Subaru Outback, 2002 Subaru Legacy, 2002 Subaru Impreza, and 2002 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Three drive cycle procedures are provided for Forester, Legacy and Outback models only. These procedures are used to confirm repair procedure has addressed fault and DTC is no longer present on those DTCs that require extended operation to meet the parameters required to set the code. Some DTCs on Forester, Legacy and Outback models require performing this procedure twice to ensure DTC does not reset.