Brake System (Complete): Remove, Install, and Overhaul
Includes: Overhaul Calipers and/or Wheel Cylinders. Replace Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Rear Disc Brakes | 3.4 | B | ||
| Rear Drum Brakes | 3.8 | B | ||
| Additional Procedure: BRAKE SYSTEM (COMPLETE): Remove, Install, and Overhaul: | ||||
| w/ABS add | 0.3 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: CALIPER: Replace: | ||||
| One | Includes: Bleed Brakes. | 0.6 | B | |
| Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation. | ||||
| Front | Not Applicable. | B | ||
| Rear | Not Applicable. | B | ||
| Combination Procedure: DISC ROTOR: Replace: | ||||
| Front,Each | Not Applicable. | B | ||
| Rear,Each | Not Applicable. | B | ||
| Combination Procedure: DRUM: Replace: | ||||
| Rear,Each | 0.1 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: | ||||
| Rear | Refer to Rear Wheel Bearing - R&R. | B | ||
| Combination Procedure: WHEEL CYLINDER: Replace: | ||||
| One | Includes: Bleed Brakes. | 0.3 | B | |