LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Removal & Installation >> Security Control Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Security Control Module

  1. Disconnect battery ground cable.
  2. Remove shift knob (MT model).
  3. Remove console cover (A) and front cover (B) while disconnecting connector. See Fig 1 .
  4. Disconnect connector from security control module.
  5. Remove bolt (A) and loosen bolt (B) without completely removing it. See Fig 2 .
  6. Remove security control module.
  7. Install security control module in reverse order of removal procedure.
    NOTE: Tighten bolts securely so that they do not come loose.
Fig 1: Removing Security Control Module (1 Of 2)
G00189501Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Removing Security Control Module (2 Of 2)
G00189448Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals