Fuel Level Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Place "NO FIRE" signs near the working area.
Be careful not to spill fuel on the floor.

NOTE: Fuel level sensor is built in fuel pump assembly.

Remove the fuel pump assembly. Refer to REMOVAL , Fuel Pump.
Disconnect the connector from the fuel pump bracket.

Fig 1: Identifying Connector For Disconnection
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which installs the fuel level sensor on the mounting bracket.

Fig 2: Locating Bolt For Removing
Courtesy of SUBARU OF AMERICA, INC.