LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Servicing >> Removal & Installation >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

  1. Prior to removal, set lever to "N" position.
  2. Remove under cover.
    CAUTION: When removing exhaust pipes, be careful each exhaust pipe does not drop out.
  3. Remove rear exhaust pipe and muffler.
  4. Remove heat shield cover.
  5. Remove snap pin from range select lever. See Fig 1 .
  6. Remove plate assembly from transmission case. See Fig 2 .
  7. Disconnect cable from select lever and then remove cable bracket. See Figure .
  8. Remove select from plate assembly.
Fig 1: Removing Snap Pin From Range Select Lever
G00366824Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Removing Plate Assembly
G00366825Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals