LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester L, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.5L >> Self-Diagnostic System >> Verification Procedure >> Notes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Verification Procedure: Notes

CAUTION: This procedure requires the vehicle to be placed on rollers or raised and supported on sturdy jack stands to allow free movement of both front and rear wheels. Ensure all safety precautions are exercised to ensure well being of technicians and equipment during this procedure. Ensure fuel tank is maintained at about 1/2 full and battery voltage is above 12 volts during test.
NOTE: This procedure is used to confirm repair procedure has addressed fault and DTC is no longer present. Some DTCs on Forester, Legacy and Outback models require verification by driving the vehicle. See DRIVE CYCLES .