October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair

Crankshaft Position Sensor:

Crankshaft Position Sensor / REMOVAL

1. Disconnect battery ground cable.

2. Remove bolt which installs crankshaft position sensor to cylinder block.

3. Remove crankshaft position sensor, and disconnect connector from it.

INSTALLATION
Install in the reverse order of removal.

Tightening Torque: T = 6.4 N.m (0.65 kgf-m, 4.7 ft-lb)