September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Sensor Gap
- Measure the distance "A" between ABS sensor surface and sensor pole face.
Courtesy of SUBARU OF AMERICA, INC.
- Measure the distance "B" between surface where the front axle housing meets the ABS sensor, and the tone wheel.
NOTE:
Measure so that the gauge touches the tone wheel teeth top.
Courtesy of SUBARU OF AMERICA, INC.
- Find the gap between the ABS sensor pole face and the surface of the tone wheel teeth by putting the measured valves in the formula below and calculating.
- ABS sensor clearance = B - A
- ABS sensor standard clearance:
- 0.3 - 0.8 mm (0.012 - 0.031 in)
NOTE:
If the clearance is outside specifications, adjust the gap using spacer (Part No. 26755AA000).