October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Rear Wheel Toe-In: Adjustment
- Loosen self-locking nut on inner side of link rear.
CAUTION:
- When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
- Discard loosened self-locking nut and replace with a new one.
Courtesy of SUBARU OF AMERICA, INC.
- Turn adjusting bolt head until toe-in is at the specification.
NOTE:
When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by approximately 3 mm (0.12 in).
Courtesy of SUBARU OF AMERICA, INC.
- Tighten self-locking nut.
- Tightening torque:
12 N.m (12.2 kgf-m, 88 ft-lb)