Knock Sensor: Installation

Install knock sensor to cylinder block.
Tightening torque:

25 N.m (2.5 kgf-m, 18 ft-lb)

NOTE: For the knock sensor's installation angle, refer to the figure below.

Fig 1: Installing Knock Sensor To Cylinder Block
Courtesy of SUBARU OF AMERICA, INC.
Connect knock sensor connector.
Install intake manifold. < Ref. to , INSTALLATION , Intake Manifold. >
Connect battery ground cable.

Fig 2: Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.