LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Outback L.L.Bean Edition AWD F6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Tank Pressure Sensor: Service and Repair

REMOVAL
1. Set the vehicle on the lift.




2. Open fuel flap lid, and remove fuel filler cap.




3. Disconnect battery ground cable.
4. Lift-up the vehicle.




5. Disconnect connector from fuel tank pressure sensor.




6. Disconnect pressure hose from fuel tank pressure sensor.




7. Remove fuel tank pressure sensor.

INSTALLATION
Install in the reverse order of removal.




Tightening Torque: 7.4 Nm (0.75 kgf-m, 5.4 ft-lb)

INSPECTION
Make sure that hoses are not cracked or loose.
scientia non olet · About LEMON Manuals