LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Outback F6-3.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Receiver Dryer >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Receiver Dryer: Service and Repair

REMOVAL

1. Disconnect ground cable from battery.
2. Using refrigerant recovery system, discharge refrigerant.
3. Disconnect pressure switch harness (A).
4. Disconnect pipe (B).




5. Loosen mounting bolts (C) to remove receiver dryer.

CAUTION: The receiver drier contains a desiccant. After disconnecting receiver drier, plug it to avoid moisture.

If receiver drier is replaced, add appropriate amount of compressor oil to the compressor.

INSTALLATION

1. Install in the reverse order of removal.

CAUTION: Replace O-rings with new ones, and apply compressor oil.

2. Charge refrigerant.
scientia non olet · About LEMON Manuals