LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Outback F6-3.0L >> Repair and Diagnosis >> Maintenance >> Fluids >> Fluid - A/T >> Service and Repair >> At Fluid Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

At Fluid Replacement

Automatic Transmission Fluid

REPLACEMENT
1. Lift-up the vehicle.
2. Drain the ATF completely.

CAUTION: Directly after the engine has been running, the ATF is hot. Be careful not to burn yourself.





3. Replace with a new gasket, and then tighten the ATF drain plug.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
4. Lower the vehicle.
5. Pour ATF into the oil charge pipe.
Recommended fluid: Dexron III type automatic transmission fluid
Capacity: Fill the same amount of ATF drained from drain plug hole.
Capacity when transmission is overhauled: 9.3 - 9.6 L (9.8 - 10.1 US qt. 8.2 - 8.4 Imp qt)
6. Check the level and leaks of ATF.
scientia non olet · About LEMON Manuals