October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Manifold Pressure/Vacuum Sensor: Service and Repair

REMOVAL

1. Disconnect battery ground cable.
2. Disconnect connector from intake manifold pressure sensor.

3. Remove intake manifold pressure sensor from throttle body.

INSTALLATION

Install in the reverse order of removal.

NOTE: Replace gasket with new one.

Tightening torque: 1.6 N.m (0.16 kgf-m, 1.2 ft-lb)