Front Wheel Toe-In: Adjustment

WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the left and right side steering tie-rods lock nuts.
Turn the left and right tie rods equal amounts until the toe-in is at the specification.
Both the left and right tie-rods are right-hand threaded. To increase toe-in, turn both tie-rods clockwise equal amounts (as viewed from the inside of the vehicle).

Fig 1: Turning Left & Right Tie Rods Equal Amounts Until Toe-In Is At Specifications
Courtesy of SUBARU OF AMERICA, INC.
Tighten the tie-rod lock nut.
1. Tightening torque: 83 N.m (8.5 kgf-m, 61.5 ft-lb)
CAUTION: Correct the tie-rod boot, if it is twisted.

NOTE: Check that the left and right wheel steering angle is within specifications.