Select Lever: Disassembly

EXCEPT SPORT SHIFT MODEL
1. Remove four washers and then detach rubber boot.
2. Remove bolts and then remove cable bracket and plate.
  
  Fig 1: Removing Bolts & Cable Bracket & Plate
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove select lever grip.
4. Detach indicator cover and pattern plate.
  
  Fig 2: Detaching Indicator Cover & Pattern Plate
  Courtesy of SUBARU OF AMERICA, INC.
5. Disconnect solenoid assembly connector.
6. While pressing shift lock cancel button, remove shift lock solenoid assembly.
  
  Fig 3: Disconnecting Solenoid Assembly Connector
  Courtesy of SUBARU OF AMERICA, INC.
7. Remove indicator light.
  
  Fig 4: Removing Indicator Light
  Courtesy of SUBARU OF AMERICA, INC.
8. Remove indicator bulb.
9. Remove indicator light cover.
  
  Fig 5: Removing Indicator Light Cover
  Courtesy of SUBARU OF AMERICA, INC.
10. Remove cushion.
  
  Fig 6: Removing Cushion
  Courtesy of SUBARU OF AMERICA, INC.
11. Tilt lever forward and pull down to separate it from frame.
  
  Fig 7: Applying Tilt Lever Forward & Pulling Down To Separate It From Frame
  Courtesy of SUBARU OF AMERICA, INC.
12. Remove clip, and "P" position switch with harness.
  
  Fig 8: Removing Clip & "P" Position Switch With Harness
  Courtesy of SUBARU OF AMERICA, INC.
13. Remove detent spring
  
  Fig 9: Removing Detent Spring
  Courtesy of SUBARU OF AMERICA, INC.
14. Remove spring.
  CAUTION: Wear goggles. Do not allow spring to fly out during removal.
15. Remove bolt and then disconnect lever upper and lever lower.
  
  Fig 10: Disconnecting Lever Upper & Lever Lower
  Courtesy of SUBARU OF AMERICA, INC.
SPORT SHIFT MODEL
1. Remove the packing.
2. Remove the grip.
  
  Fig 11: Removing Grip
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the indicator light, and then remove the indicator cover.
  NOTE: Be careful not to break the indicator light during removal.
  
  Fig 12: Removing Indicator Cover
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the blind.
5. Remove the clips, and then remove the guide plate.
  
  Fig 13: Removing Clips & Guide Plate
  Courtesy of SUBARU OF AMERICA, INC.
6. Remove the clamp, shift lock solenoid and cushion.
  
  Fig 14: Removing Clamp, Shift Lock Solenoid & Cushion
  Courtesy of SUBARU OF AMERICA, INC.
7. Move select lever to "1" range.
8. Remove the bolt.
  
  Fig 15: Removing Bolt
  Courtesy of SUBARU OF AMERICA, INC.
9. Remove the lock plate A, B, C and bushing.
  
  Fig 16: Removing Lock Plate A, B, C & Bushing
  Courtesy of SUBARU OF AMERICA, INC.
10. Remove the screw.
  
  Fig 17: Removing Screw
  Courtesy of SUBARU OF AMERICA, INC.
11. Remove the bushing.
  
  Fig 18: Removing Bushing
  Courtesy of SUBARU OF AMERICA, INC.
12. Remove the clip, and then remove the rod and the spring.
  
  Fig 19: Removing Clip, Rod & Spring
  Courtesy of SUBARU OF AMERICA, INC.
13. Remove the bolt.
  
  Fig 20: Removing Bolt
  Courtesy of SUBARU OF AMERICA, INC.
14. Remove the bracket guide ASSY.
  
  Fig 21: Removing Bracket Guide ASSY
  Courtesy of SUBARU OF AMERICA, INC.
15. Remove the grommet, and then extract spring pin from the top.
  
  Fig 22: Removing Grommet & Then Extract Spring Pin From Top
  Courtesy of SUBARU OF AMERICA, INC.
16. Remove the arm and then take away the lever and arm bracket from plate.
  
  Fig 23: Removing Arm & Then Take Away Lever & Arm Bracket From Plate
  Courtesy of SUBARU OF AMERICA, INC.
17. Remove the spring, and then remove the detent arm.