SUBARU Select Monitor (Normal Mode)

On << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after the information of engine type is displayed.
On << Engine Diagnosis >> display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
On << Diagnostic Code(s) Display >> display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.

NOTE:

For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
For details concerning DTC, < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >