SUBARU Select Monitor (OBD Mode)

On << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after the information of engine type is displayed.
On << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
On << OBD Menu >> display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
Make sure that a DTC is shown on display screen.

NOTE:

For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
For details concerning DTC, < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >