SUBARU Select Monitor (Normal Mode)

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after the information of engine type is displayed.
On the << Engine Diagnosis >> display screen, select the {DTC Display} and press the [YES] key.
On the << DTC Display >> display screen, select the {Current DTC} or {History DTC} and press the [YES] key.
NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL" .
- For detailed concerning DTC, < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >