October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Cable: Adjustment
- Shift the select lever to "N" range.
- Remove the rear exhaust pipe and muffler.
- SOHC model
< Ref. to REMOVAL
, Rear Exhaust Pipe.> < Ref. to REMOVAL
, Muffler. >
- DOHC turbo model
< Ref. to REMOVAL
, Rear Exhaust Pipe.> < Ref. to REMOVAL
, Muffler. >
- DOHC 3.0 L model
< Ref. to REMOVAL
, Rear Exhaust Pipe.> < Ref. to REMOVAL
, Muffler. >
- Remove the heat shield cover.
Courtesy of SUBARU OF AMERICA, INC.
- Loosen the adjusting nuts on both sides.
Courtesy of SUBARU OF AMERICA, INC.
- Turn the adjusting nut B until it lightly touches the connector.
Courtesy of SUBARU OF AMERICA, INC.
- Set a spanner wrench to adjusting nut B so that it does not rotate, and then tighten the adjusting nut A.
Tightening torque:
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Courtesy of SUBARU OF AMERICA, INC.
- After the completion of adjustment, confirm that the select lever operates normally at all ranges.
- Install in the reverse order of removal.