Enable Condition: Notes
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Battery voltage | > 10.9 V |
| Atmospheric pressure | > 75.1 kPa (563 mmHg, 22.2 inHg) |
| Engine coolant temperature | >/= 70°C (158°F) |
| Catalyst warm-up counter on Map 2 | >/= 8000 |
| Misfire detection during 200 engine revs. | < 5 times |
| Learning value of evaporation gas density | >/= 0.20 |
| Sub feedback | Operating |
| Evaporative system diagnostic | Not in operation |
| Difference between actual and target time lambda < 0.10 | 1000 milliseconds or more |
| Vehicle speed | > 70 km/h (43.5 MPH) |
| Amount of intake air | 10 <-- --> 40 g (0.35 <-- --> 1.41 oz)/s |
| Engine load change every 0.5 engine revs. | < 0.02 g/rev |
| Rear O2 output change from below 660 mV to over | Experienced after fuel cut |
| After engine starting | >/= 205 seconds |
| Purge execution cumulative time | 5 seconds or more |