LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Impreza Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Drive Cycle >> Procedure >> Drive Cycle E
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Drive Cycle E

  1. Make sure that the battery voltage is more than 10.9 V.
  2. Perform the clear memory mode. < Ref. to CLEAR MEMORY MODE . >
  3. Drive the vehicle for the distance equal to fuel of 30 l  (7.9 US gal, 6.6 Imp gal).
    NOTE:
    • It is possible to drive intermittently.
    • Do not disconnect the terminal of battery during diagnosis. (If disconnecting the terminal of battery, the data will be cleared.)
    DTC CHART

    DTC Item Condition
    P0461 Fuel Level Sensor Circuit Range/Performance -