October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Lever: Assembly
- Clean all the parts before assembly.
- Apply grease [Multemp AC-D or equivalent] to each part. < Ref. to
AT SELECT LEVER , COMPONENT, General Description. >
- Assemble in the reverse order of disassembly.
NOTE:
- Refer to "COMPONENT" for each tightening torque. < Ref. to
AT SELECT LEVER , COMPONENT, General Description. >
- Connect the switch terminal to the connector.
- After completing installation, shift the select lever from "P" range to "D" range, then check whether the indicator and select lever matches, whether the pointer and position mark matches and what the operating force is.