LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

Knock Sensor

REMOVAL




1. Disconnect the ground cable from the battery.
2. Remove the air intake chamber.




3. Disconnect the knock sensor connector.




4. Remove the knock sensor from cylinder block.

INSTALLATION




1. Install the knock sensor to cylinder block.

NOTE: Extraction area of knock sensor cord must be positioned at a 60 degrees angle relative to the engine rear.




2. Connect the knock sensor connector.
3. Install the air intake chamber.




4. Connect the battery ground cable to the battery.
scientia non olet · About LEMON Manuals