Electrical Specification
CAUTION:
Never remove the occupant detection control module, occupant detection sensor or seat frame because they are integrated into one unit.
CONNECTOR NUMBER AND WIRE COLOR REFERENCE CHART
| Terminal name | Terminal No. | Input/Output value | Remarks | |
|---|---|---|---|---|
| IG - power supply | 9 | 9 - 16 V | When ignition switch ON | |
| Airbag control module communication | (COM) | 10 | Open collector terminal | Communication line |
| Airbag control module communication | (GND) | 5 | 0 V | Ground |
| Belt tension sensor | (Vcc) | 4 | 0 - 5 V | Belt tension sensor power supply |
| (Vout) | 16 | 0.5 - 4.5 V | Sensor output voltage | |
| (GND) | 14 | 0 V | Sensor ground | |
| Occupant detection sensor | (Vcc) | 6 | 0 - 5 V | Pressure sensor power supply |
| (Vout) | 7 | 0.5 - 4.5 V | Sensor output voltage | |
| (GND) | 15 | 0 V | Sensor ground | |
| Buckle switch | 1 | 0 - IG voltage | Ignition voltage when switch ON | |
| Buckle switch | (GND) | 2 | 0 V | Switch ground |