Cruise Control Command Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
Measure cruise control command switch resistance.
Check continuity between cruise control command switch terminals.
CRUISE CONTROL COMMAND SWITCH TERMINALS RESISTANCE SPECIFICATION
| Switch | Position | Terminal No. | Standard |
|---|---|---|---|
| CANCEL | ON | 1 (+) and 2 (-) | Less than 1 Ω |
| ON | 1 (+) and 3 (-) | Less than 1 Ω | |
| SET/COAST | OFF | 1 and 2 | More than 1 MΩ |
| ON | 1 and 2 | Less than 1 Ω | |
| RESUME/ACCEL | OFF | 1 and 3 | More than 1 MΩ |
| ON | 1 and 3 | Less than 1 Ω |
If NG, replace cruise control command switch.