Front Fog Light Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Turn stone guard counterclockwise, and then remove it.

Fig 1: Turning Stone Guard Counterclockwise
Courtesy of SUBARU OF AMERICA, INC.
Remove mounting bolts.

Fig 2: Identifying Front Fog Light Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove two clips and lower the mudguard.

Fig 3: Locating Clips
Courtesy of SUBARU OF AMERICA, INC.
Disconnect harness connector (a).
Remove nut (b) then detach fog light assembly.

Fig 4: Identifying Harness Connector And Nut
Courtesy of SUBARU OF AMERICA, INC.